Lubrication Systems (Multi-Line)
Central Pumping Reservoir With D-Series Interface & Power Supply
Model # 7165D
65-Gallon Reservoir Tank with D-Series Full Interface & Power Supply.
Model # 7110D
10-Gallon Reservoir Tank with D-Series Full Interface & Power Supply.
New Features brought to you by the D-Series
- Observe all conveyor inputs as well as visual lubricant data
- Track lubricant usage
- Access to change IP address of power supply
- View locally connected conveyors
- Visualize reservoir lubricant levels.
Overhead Enclosed Track Central Conveyor Lubrication Head Units
Model 9500L
Richards-Wilcox Overhead Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings
Model 9500INVL
Richards-Wilcox Inverted Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings
Model 9501L
Unibilt or Rapid Overhead Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings
Model 9501INVL
Unibilt or Rapid Inverted Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings
Model 9502L
Dual Vertical Bearing Chain Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal Bearings and Single/Dual Vertical Bearings
Model 9510L
Round Tube Overhead Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings
For all MODEL #9010L Units: Customer Must Supply a 30″ Rail Section for Pre-Mounting
Units are also available for most other conveyor manufacturers.
New Features Brought To You By The Enclosed Track Central Lubrication System
- Chain pins and open trolley bearings lubricated
- Front keypad for easy programming
- Fully programmable user interface (factory preset when possible)
- Requires the use of a Central Pumping Reservoir and Power Supply
- Units are pre-mounted on modified rail sections unless noted.
Caterpillar Drive Lubricators
These units are mounted at the conveyor drives and are a recommended addition to the conveyor lubrication system. They lubricate caterpillar drive chain and dogs and are operated by the controller on the conveyor lubricator.
Model 9125CD
Caterpillar Drive Chain Pin Lubricator
Model 9126CD (Back Up Drives)
Auxillary Cat Drive Chain Pin Lubricator
New Features Brought To You By Caterpillar Drive Lubricators
- Chain pin lubrication
- Controlled, Powered, and Supplied by the 9109L/7110D
- Includes: 50′ Seven Conductor Wire & 50′ Lubricant Supply Tubing (1/4″ nylon tubing standard).
Overhead or Inverted Free Rail Central Conveyor Lubrication Head Units
9500L Series Central System Free Carrier Conveyor Lubricators
The Mighty Lube 9000L series central system free carrier conveyor lubricators are custom made to each specific chain. They are specifically designed to lubricate the free carrier low trolley wheels and guide wheels using precision shots of lubricant. They can also lubricate optional mechanical pivot points on the carrier.
I-Beam Conveyor Head Units
The I-Beam Conveyor Head Unit, is a fully programmable user interface. It requires the use of a Central Pumping Reservoir with Power Supply, and units are pre-mounted on modified rail sections unless noted.
Model 9503L
3″ Monorail Overhead Conveyor Lubricator
Model 9503INVL
3″ Inverted Conveyor Lubricator
Model 9504L
4″ Monorail Overhead Conveyor Lubricator
Model 9504INVL
4″ Inverted Conveyor Lubricator
Model 9506L
6″ Monorail Overhead Conveyor Lubricator
Model 9506INVL
6″ Inverted Conveyor Lubricator
All Models Lubricate: Chain Pins and Trolley Bearings
Units are also available for most all other conveyor manufacturers.
New Features Brought To You By The I-Beam Conveyor Head Unit
- Easy to use keypad
- Password access for authorized users
- LCD display showing current conveyor chain link, chain speed, and programmed values
- Adjustable parameters include lubricant cycles, lubricant shot volume, chain link number, and chain pitch
- Additional inputs to control other lubrication points, other lubricators, and an automatic greaser for sealed trolley wheel.
Power & Free System Head Units
Model 9505L
Power and Free Conveyor Lubricator For Richards-Wilcox Conveyors
Lubricates: Chain Pivots and Horizontal/Vertical Bearings on power chain, Load Bearings and Guide Rollers on the Free Carrier
Model 9507L
Power and Free Conveyor Lubricator For Unibilt or Rapid Conveyors
Lubricates: Chain Pivots and Horizontal/Vertical Bearings on power chain, Load Bearings and Guide Rollers on the Free Carrier
Model 9508L
Power and Free Conveyor Lubricator For 3″ I-Beam
Lubricates: Chain Pins and Trolley Bearings on the Power Chain, Load Bearings and Guide Rollers on the Free Carrier
Model 9509L
Power and Free Conveyor Lubricator For 4″ I-Beam
Lubricates: Chain Pins and Trolley Bearings on the Power Chain, Load Bearings and Guide Rollers on the Free Carrier
For All Power & Free units: the Customer Must Supply a Rail Section with at least 36″ between the yokes for Pre-Mounting.
New Features Brought To You By The Power And System Head Units
- Fully programmable user interface
- Requires the use of a Central Pumping Reservoir and Power Supply
- Customer must supply a rail selection with at least 30″ between the yokes for pre-mounting on all above models.
Central Conveyor Lubrication Systems
Networked lubrication systems for facilities with multiple conveyor lines
Mighty Lube centralized conveyor lubrication systems are networked and can properly lubricate several conveyors, extending chain life and increasing manufacturing efficiency. They consist of a power supply and conveyor lubrication tank unit that connects to a network of head units, one located at each conveyor line. And unlike some lubrication methods in use today, Mighty Lube industrial lubricators place a precise shot of lubricant at each lubrication point, therefore eliminating waste and droplets.
Mighty Lube Central Conveyor Lubrication System Features
- Available for many conveyor configurations
- Ideal for plants with multiple lines, inverted conveyors, or heavy lubrication requirements
- Requires no plant air for operation
- Supports up to 10 lubricating heads in a 500 foot radius
- A cost-effective and easily-used tool for managing conveyor lubrication needs
- Utilizes a Central Pumping Reservoir that can be conveniently mounted on the floor
- Mighty Lube Systematic Lubrication, Inc. produces the highest quality and most user-friendly industrial lubrication equipment available. Patented microprocessor controls make operation as easy as pushing a button. The simple step-by-step menu can be programmed easily, with no complicated readouts or switches to set.
Mighty Lube Systematic Lubrication, Inc. produces the highest quality and most user-friendly industrial lubrication equipment available. Patented microprocessor controls make operation as easy as pushing a button. The simple step-by-step menu can be programmed easily, with no complicated readouts or switches to set.
Conveyor Lubrication Reservoir Tank & Power Supply equipped with
- Full user interface for programming
- 1/3HP TEFC pump drive motor
- Heavy duty rotor gear pump
- Flow sensing device to detect severed lube line, shut down pump motor, and activate audio/visual alarm
- Heavy duty steel reservoir with solvent-resistant finish
- Automatic pump motor start and stop circuit
- Low level audio/visual alarm
- Lubricant empty audio/visual alarm with pump motor shut down circuit
- Operating voltage – 120VAC, 60Hz, 15A
Head Units are equipped with
- A Programmable microprocessor controller which includes:
- An easy-to-use keypad
- Password access for authorized users
- LCD display showing current conveyor chain link, chain speed, in addition to programmed values
- Adjustable parameters for lubricant cycles, lubricant shot volume, chain link number, as well as chain pitch
- Additional inputs to control other lubrication points, other lubricators, and an automatic greaser for sealed trolley wheels
- Memory circuit to automatically resume if power is interrupted
- Extended range proximity sensor to detect lubrication points
- Lubricant delivery nozzles configured to lubricate specified lubrication points
- Premounted on a modified section of track/rail ready to be welded into place
- Operating voltage – 24VDC supplied by the Central pumping reservoir tank and Power Control Unit.