Mighty Lube® Conveyor Lubrication Systems – Multi-Line

Networked lubrication systems

Mighty Lube® Centralized Conveyor Lubrication Systems are networked and can properly lubricate several conveyors, extending chain life and increasing manufacturing efficiency. They consist of a power supply and conveyor lubrication tank unit that connects to a network of head units, one located at each conveyor line. And unlike some lubrication methods in use today, Mighty Lube industrial lubricators place a precise shot of lubricant at each lubrication point, therefore eliminating waste and droplets.

System Features:

  • Available for many conveyor configurations
  • Ideal for plants with multiple lines, inverted conveyors, or heavy lubrication requirements
  • Requires no plant air for operation
  • Supports up to 10 lubricating heads in a 152 meter radius
  • A cost-effective and easily-used tool for managing conveyor lubrication needs
  • Utilizes a Central Pumping Reservoir that can be conveniently mounted on the floor

Mighty Lube Systematic Lubrication, Inc. produces the highest quality and most user-friendly industrial lubrication equipment available. Patented microprocessor controls make operation as easy as pushing a button. The simple step-by-step menu can be programmed easily, with no complicated readouts or switches to set.

networked conveyor lubrication system

Reservoir Tank & Power Supply

Equipped with:

  • Full user interface for programming
  • 1/3HP TEFC pump drive motor
  • Heavy duty rotor gear pump
  • Flow sensing device to detect severed lube line, shut down pump motor, and activate audio/visual alarm
  • Heavy duty steel reservoir with solvent-resistant finish
  • Automatic pump motor start and stop circuit
  • Low level audio/visual alarm
  • Lubricant empty audio/visual alarm with pump motor shut down circuit
  • Operating voltage – 120VAC, 60Hz, 15A
Learn More

Central System Head Units

One per conveyor line, equipped with:

  • A Programmable microprocessor controller which includes:
    • An easy-to-use keypad
    • Password access for authorized users
    • LCD display showing current conveyor chain link, chain speed, in addition to programmed values
    • Adjustable parameters for lubricant cycles, lubricant shot volume, chain link number, as well as chain pitch
    • Additional inputs to control other lubrication points, other lubricators, and an automatic greaser for sealed trolley wheels
  • Memory circuit to automatically resume if power is interrupted
  • Extended range proximity sensor to detect lubrication points
  • Lubricant delivery nozzles configured to lubricate specified lubrication points
  • Premounted on a modified section of track/rail ready to be welded into place
  • Operating voltage – 24VDC supplied by the Central pumping reservoir tank and Power Control Unit
See Available Models

Central Pumping Reservoir with D-Series Interface & Power Supply

d-series lubrication system tank and interface

D-Series Features:

  • Observe all conveyor inputs as well as visual lubricant data
  • Track lubricant usage
  • Access to change IP address of power supply
  • View locally connected conveyors
  • Visualize reservoir lubricant levels

D-Series Sizes:

Model 7165D
65 Gallon (246 Liter) Reservoir Tank with D-Series Full Interface & Power Supply

Model 7110D
10 Gallon (38 Liter) Reservoir Tank with D-Series Full Interface & Power Supply

Request Quote

Central System Head Units

central lubricator head unit for I-Beam conveyors

Model 9103L Head Unit

I-Beam Conveyor Head Units

Model 9103L
3 inch (7.5 cm) Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Model 9103INVL
3 inch (7.5 cm) Inverted Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Model 9104L
4 inch (10 cm) Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Model 9104INVL
4 inch (10 cm) Inverted Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Model 9106L
6 inch (15 cm) Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Model 9106INVL
6 inch (15 cm) Inverted Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Units are also available for most all other conveyor manufacturers

Request Quote
9000L central lubricator head unit for Richards-Wilcox conveyors

Model 9100L Head Unit

Enclosed Track Conveyor Head Units

Model 9100L
Richards-Wilcox Overhead Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings

Model 9100INVL
Richards-Wilcox Inverted Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings

Model 9101L
Unibilt or Rapid Overhead Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings

Model 9101INVL
Unibilt or Rapid Inverted Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings

Model 9102L
Dual Vertical Bearing Chain Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal Bearings and Single/Dual Vertical Bearings

Model 9110L
Round Tube Overhead Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings
For all MODEL 9110L Units: Customer Must Supply a 30″ Rail Section for Pre-Mounting

Units are also available for most all other conveyor manufacturers

Request Quote
9107L power and free central lubrication head unit

Model 9107L Head Unit

Power & Free Conveyor Head Units

Model 9105L
Power and Free Conveyor Lubricator For Richards-Wilcox Conveyors
Lubricates: Chain Pivots and Horizontal/Vertical Bearings on power chain, Load Bearings and Guide Rollers on the Free Carrier

Model 9107L
Power and Free Conveyor Lubricator For Unibilt or Rapid Conveyors
Lubricates: Chain Pivots and Horizontal/Vertical Bearings on power chain, Load Bearings and Guide Rollers on the Free Carrier

Model 9108L
Power and Free Conveyor Lubricator For 3″ I-Beam
Lubricates: Chain Pins and Trolley Bearings on the Power Chain, Load Bearings and Guide Rollers on the Free Carrier

Model 9109L
Power and Free Conveyor Lubricator For 4″ I-Beam
Lubricates: Chain Pins and Trolley Bearings on the Power Chain, Load Bearings and Guide Rollers on the Free Carrier

For All Power & Free units: the Customer Must Supply a Rail Section with at least 36″ between the yokes for Pre-Mounting

Request Quote
Collect vital conveyor data for up to 100 lines. Learn more about how the Next Gen system can benefit your facility.