Mighty Lube® Conveyor Cleaning Brushes
(Non-Powered)

variety of mighty lube conveyor brushes

Clean Conveyors Increase Efficiency

Mighty Lube conveyor cleaning brushes help to keep your conveyors running at their best. We offer conveyor trolley and chain cleaners as well as track, rail and yoke cleaning brushes.

Conveyor brushes work to remove and prevent accumulation of build-up and debris. By doing this, conveyor cleaning systems reduce part contamination and improve grounding necessary on powder and e-coat lines. Mighty Lube non-powered brush assemblies have replaceable brushes which are easy to install and do not require the removal of the entire unit.

Cleaning the trolley load bearing surfaces and the rail will improve grounding for better parts coating and also eliminate rejected parts due to contamination!

Types of Non-Powered Conveyor Brushes

I-Beam Cleaning Brushes

Beam Sweeps

Cleans Rail Surfaces

Yoke Brushes

Cleans Yoke Area on Trolleys

Chain & Trolley Brushes

Non-Powered / Cleans Chain and Trolleys

Enclosed Track Cleaning Brushes

Channel Sweeps

Cleans Internal Track Surfaces

Chain Brushes

Cleans Chains

Other Brushes

Click the above text to jump the the section. All details about each cleaning system are included below. 

Mighty Lube® I-Beam Brushes

Beam Sweeps / Rail Cleaning Brushes

6-91bc beam sweep brush for 15 cm 10 inch rail conveyor

The Mighty Lube® Beam Sweep is designed to clean the web surfaces of the rail. Cleaning the rail helps reduce debris fall out as well as improve grounding contact. This unit is installed into a chain link so the brushes can clean the rail as the chain travels. For best cleaning results it is recommended to install one beam sweep for every 250 feet of chain. Replaceable brushes are made stainless steel material.

Beam Sweep Replacement Brushes are Made of Stainless Steel – Each unit requires 6 brushes for complete replacement (2 Side, 4 Top/Bottom)

Model 3-91BC
Fits 3 Inch (7.6 cm) Beam rail conveyor

Replacement Brushes:
913BRS (2 Side)
913BRTB (4 Top/Bottom)

Model 4-91BC
Fits 4 Inch (10 cm) Beam rail conveyor

Replacement Brushes:
914BRS (2 Side)
914BRTB (4 Top/Bottom)

Model 6-91BC
Fits 6 Inch (15 cm) Beam rail conveyor

Replacement Brushes:
916BRS (2 Side)
916BRTB (4 Top/Bottom)

Yoke Cleaning Brush

Mighty Lube Model 40Y Yoke Brush

The Mighty Lube® Yoke Brush cleans the yokes on the trolley as the chain travels around. You install this brush by welding to the bottom of the rail. The Yoke Brush is designed to remove buildup from hard to reach, often overlooked sources of contamination.

Yoke Cleaner Replacement Brushes are Made of Stainless Steel – Each unit requires 1 brushes for complete replacement.

Model 30Y
Fits 3 Inch (7.6 cm) Beam rail conveyor

Replacement Brush: 30RB (1)

Model 40Y
Fits 4 Inch (10 cm) and 6 Inch (15 cm) Beam rail conveyor

Replacement Brush: 40RB (1)

Chain & Trolley Cleaner (for I-Beam Conveyors)

400-I conveyor chain cleaner

Mighty Lube® Non-Powered I-Beam Conveyor Chain Cleaners are a brush system that cleans the chain and trolleys on I-Beam conveyors as the chain travels. This chain cleaning brush assembly removes debris which helps to reduce rejects without contaminating parts. The chain cleaner adjusts to contact hard to reach points and is spring loaded to prevent jamming if a hanger passes at an odd angle.

Standard units come with stainless steel brushes. Mighty Lube also offers the chain cleaner with nylon carbide brushes which is longer lasting.

Replacement brushes are the same part number for all sizes of chain cleaner and require 20 total brushes for complete replacement on one unit.

Stainless Steel Replacement Brushes: 75RB (20)
Nylon Carbide Replacement Brushes: 75NRB (20)

I-Beam Chain Cleaner Instructions

Model 300-I
Fits 3 Inch (7.6 cm) Beam rail conveyor

Model 400-I
Fits 4 Inch (10 cm) Beam rail conveyor

Model 600-I
Fits 6 Inch (15 cm) Beam rail conveyor

Mighty Lube® Enclosed Track Conveyor Brushes

Channel Sweeps

UN-91 Enclosed track conveyor channel brushes

Mighty Lube® Channel Sweep brushes are designed to remove dirt and debris from the internal conveyor track surfaces. This improves grounding and helps reduce part rejects. These brush assemblies are easily installed by replacing a single chain link. We recommend installing one channel cleaner every 250 feet of chain.

Four replacement brushes are required for complete replacement on one unit. Standard brushes are a phosphorus bronze material but we also offer a steel brush.

Model UN91
Fits Unibilt and Rapid Enclosed Track Conveyor
Channel Measurements: 2.5 inch (6.35 cm) wide by 2.375 (6.0325 cm) high

Model RW91
Fits Richards-Wilcox Enclosed Track Conveyor
Channel Measurements: 1.75 inch (4.445 cm) wide by 2.3125 (5.87375 cm) high

Chain Cleaner (for Enclosed Track Conveyors)

8074B conveyor chain cleaner for enclosed track type conveyors

8074B Chain Cleaner

These conveyor cleaning brush assemblies remove dirt and debris from enclosed track conveyor chains. The units come pre-mounted on a modified rail section.

Replacement brushes are made of a crimped carbon steel material. One top brush and four side brushes are required for complete replacement on one unit.

Model 8074B
Fits Unibilt and Rapid Enclosed Track Conveyor

Model 8075B
Fits Richards-Wilcox Enclosed Track Conveyor

Mighty Lube® Part Saver Brushes

Overspray Eliminator Brush

800QCB Part saver brush

This is also known as the part saver brush because it prevents contamination of parts by lubricant overspray. The part saver brush assembly mounts on the conveyor at the location of the lubricator.

Requires two replacement brushes for one complete unit.

Model 800QCB
Available for most conveyor types
Replacement Brushes: 91006RB (2)

Request Quote for 800QCB800QCB Instructions
Check out the powered conveyor cleaner options manufactured by OPCO Lubrication Systems.