Industrial Lubricants & Greases

WearMaster® Lubricants & Greases

Do you have excessive build-up on your conveyor chain? Are you experiencing premature chain wear? You may benefit from changing the type of lubricant you are using. Using the right lubricants and matching the lubricant to the conveyor can save money lost to chain wear, downtime and extra energy consumption. Our complete line of OPCO WearMaster® lubricants was developed for all different types of conveyor applications. These high quality lubricants and greases are designed to keep your conveyor system running smoothly.

Conveyor Chain Lubrication Specialists

Recognized worldwide as lubrication systems specialists, we have years of experience in every aspect of conveyor lubrication; from equipment design, sales and installation to lubricant sales, systems service, consultation and custom problem-solving. As a result, we’re familiar with your maintenance needs and concerns. We can supply you with the WearMaster® lubricants that will provide the best results in your conveyor system.

Industrial Conveyor Lubricants

LubricantsFlash PointTypeAdvantagesTechnical Data Sheet
KF 25122°FMoS2Dry Film Bonded LubricantDownload PDF
KF 35158°FMoS2Dry Film Lubricant – higher flash pointDownload PDF
KF 36136°FMoS2 + GraphiteCan be used in temperatures up to 700°FDownload PDF
KF 39130°FSiliconeFDA approved for use in areas of possible
incidental food contact
Download PDF
KF 100554°FPolyol EstersHigh temperature, ashless, synthetic lubricantDownload PDF
KF 100LT445°FPolyol EstersSimilar to KF 100, with lower viscosityDownload PDF
KF 101-220604°FPolyol EstersAshless, water-washout resistantDownload PDF
KF 101-220VT604°FPolyol EstersSame as KF 101-220 with an added Violet TintDownload PDF
KF 102456°FPolyglycolHigh-Temperature, ashless, and water-solubleDownload PDF
KF 245464°FPetroleumFor severe industrial applications where high loads and ambient
conditions cause premature wear and failures
Download PDF
KF 270482°FWhite OilUSDA H1 LubricantDownload PDF
KF 272367°FWhite OilUSDA H1 LubricantDownload PDF
KF 310410°F–475°FPetroleumLubricating oils for use in various machine tool applicationsDownload PDF
KF 330435°F–464°FPetroleumHigh performance industrial gear lubricantsDownload PDF
KF 350385°F–518°FPetroleumHydraulic FluidsDownload PDF
KF 360305°F-315°FPolyol EsterFood Grade Oven Chain LubricantsDownload PDF

Industrial Conveyor Greases

GreaseKey BenefitBaseAdvantagesTechnical Data Sheet
KG 450High dropping point, good mechanical stability, and high temperature oxidation makes it the best multipurpose grease in plants with high temperature requirements
Lithium ComplexHigh Temperature Extended Performance
Polymer Grease

NGLI Grade 2

Dropping Point:
500°F (260°C)
Download PDF
KG 451-0Outstanding water resistance, with sever shock loading, and tough protection against wear, corrosion, and high temperature

Lithium 12-hydroxySuper water resistant grease NLGI Grade 0Download PDF
KG 451-2Outstanding water resistance, with sever shock loading, and tough protection against wear, corrosion, and high temperature

Lithium 12-hydroxySuper water resistant grease NLGI Grade 1.5Download PDF
KG 452High Water Resistance, Film Adhesion, and Wear Protection with environmentally friendly mineral solvent instead of chlorinated solvents

Aluminum ComplexSynthetic Open Gear CompoundDownload PDF
KG 453Complete corrosion control both as a lubricant and as a protective coating in areas of high salt and chemical contamination
Calcium ComplexCorrosion Control Grease

NGLI Grade 1 ½

Dropping Point:
500°F (260°C)
Download PDF
KG 455540º F Dropping PointPolyureaHigh Temperature / NLGI Grade 2 / USDA
H2 Grease
Download PDF
KG 460590º F Dropping PointSyntheticExtreme High Temperature, High
Pressure Grease
Download PDF
KG 470Water resistance, oxidation stability and anti-wear protection that allows uses in applications thought unacceptable for ordinary food grade greases.

Aluminum ComplexH1 High Performance Food Grade Grease

NGLI Grade:
0 (KG 470-0)
2 (KG-470-2)
Download PDF
KG 475High Water Resistance, Film Adhesion, and Wear Protection
Aluminum ComplexSynthetic Open Gear Compound GreaseDownload PDF
KG 458Oxidation Stability at 210ºC, No Reaction (ASTM D5483)
PTFEPolytetrafluoroethylene (PTFE) thickener,
perfluoropolyether (PFPE) base oil,
Molybdenum Disulfide
KG 459Oxidation Stability at 210ºC, No Reaction (ASTM D5483)PTFE

Polytetrafluoroethylene (PTFE) thickener
with a perfluoropolyether (PFPE) base oil

NGLI Grade 2

Dropping Point:
482°F (250°C)
Download PDF
KG 490650º F Dropping PointPAO Synthetic100% PAO synthetic high-temperature grease
with an inorganic based and non-melting
Download PDF

Looking for MSDS (Safety Data Sheets) on OPCO WearMaster® lubricants or greases? We can help! Please contact us via phone at (231) 335-2500 or send us a message.